AZS Ramming Materials

AZS Ramming Materials
AZS Ramming Materials
AZS Ramming Materials
AZS Ramming Materials
Overview

Bulk density g/cm3: 3.2

Thermal conductivity: Good

Anti-corrosion property: Excellent at 1300℃

particle diameter of grain: 0-5mm

Application temperature: Cold/low temperature

Used for: Under bottom paving, spreading, Melting end and working area

Feature

USAGE:

1. Open the bag to check if the coagulant agent is dampened or hardened, and then spread the coagulant agent uniformly into the bag;

2.Mix certain amount of the mass according to on-site assumption. When it mixes well, add room temperature water by a ratio of 6-7%, or adjust the ratio according to local climatic condition and water content of the mixture. Blend it till there is no raw ramming mass left or till that it will break into pieces instantly when it falls to the ground after one unlooses his grip of the mass from the height of 0.33 meters;

3.The construction site and bonder should be clean and without sundries. The leftover well-mixed mass should be covered with plastic sheet film or placed in shady and cool place. The mass that is not dry and hard can be used again; otherwise, it should be crushed and used together with other raw material or abandoned.

4.Mix with water to make the material like slurry then press smooth by vibrating.

CONCRETING TIME: BEGINNING TIME: 0:15~2:00 HOURS

FINISHING TIME: 3:00~6:00 HOURS

HEATING TIME: AFTER 150:00 HOURS

THIS MATERIAL IS WITHOUT PHOSPHORUS,AND DOES NOT POLLUTE THE ENVIROMENT.

Technical Data
Chemical
Composition
Al2O3 48 48 48 48
  ZrO2 30 30 30 30
  SiO2 20 20 20 20
  Others 2 2 2 2
Bulk density g/cm3 3.2 3.1 3.1 3.1
Crystallographic
analysis after being
sintered at
1300/1500℃
Corundum, 
zirconium oxide
Corundum, 
zirconium oxide
Corundum, 
zirconium oxide
Corundum, 
zirconium oxide
Thermal conductivity Good Good Good Good
Anti-corrosion property Excellent at 
1300℃
Excellent at 
1300℃
Excellent at 
1300℃
Excellent at 
1300℃
particle diameter of 
grain
0-5mm 0-0.6mm 0-0.5mm 0-0.4mm
Application 
temperature
Cold/low 
temperature
Cold/low 
temperature
Cold/low 
temperature
Cold/low 
temperature
Quantity of water 8-10% 
(proportion 
by weight)
10-12% 
(proportion 
by weight)
10-12% 
(proportion 
by weight)
10-12% 
(proportion 
by weight)
Solidification Water 
(ceramic)
Water 
(ceramic)
Water 
(ceramic)
Water
(ceramic)
Packaging 25kg/bag 25kg/bag 25kg/bag 25kg/bag
Quality guarantee
period
12 months 12 months 12 months 12 months
Used for Under bottom 
paving,spreading,
Melting end and
working area
Under bottom 
paving,spreadin
nd the place
between fused cast
brick and ERSOL 
50
Under bottom paving
, spreading, and the 
joint between bricks
 of two layers that are
between the fused 
cast brick and ERSOL 
50
Joint between 
bricks of two layers

Need more information? Drop us a line

For more information on any of our products please get in touch using the form below. One of our sales team will respond to your enquiry as soon as possible.

Copyright © 2014 Zhengzhou Sunrise Refractory Co., Ltd. Site Index Product IndexSitemap   

main products:Fused Cast Alumina Block,  Fused Cast High Zirconia Block,  Fused Cast Skid Rail Block